Return to site

How to Find the Source of a Water Leak

So there is a really wet area or large pool area of water inside your front yard, and you also suspect a normal water drip. But where could it be?

The two 2 most typical places happen to be:

In the primary service line in the middle of your drinking water meter and house shutoff valve
Within your irrigation system

We will show you how exactly to isolate these 2 elements of your plumbing method and apply your normal water meter to learn where the drip is.

Don't be anxious, it's quick: when you can switch a valve on / off, you are able to do this. (Needless to say, unless you want to, it is possible to contact our drip detection specialists.)

Notice: Shut-off valves can crack when you transform them on or off if they are previous or corroded.
How to check out if the drip will be in the provider line

Water makes your home from city's water key, through your normal water meter and trips underground through the primary service line on your home's shutoff valve.

To discover if that's where the leak is usually, we will turn off this to almost every other part of your house. To get this done...
1. Turn off the at the home's shut-off valve

Look for where your service range happens of the bottom and switches into your home. That is frequently in leading or corner of your house. However, in a few houses in Atlanta, the shutoff is really in the cellar.

To turn off of the water, in close proximity the shut-off valve. This tends to be considered a gate valve just like the 1 in the picture below.

2. Locate your drinking water meter

Choose a metal lid over a concrete box close to the curb. Work with a screwdriver to lift up the lid.

3. Browse the meter for the leak

You're examining to observe if water continues to be running right through the meter. If it's, the leak is your service series. If no normal water is going throughout the meter, the drip is someplace else.

How you browse the meter depends upon the sort of meter you could have: analog or electronic.

How to learn an analog drinking water meter: Go through the main dial hands plus the low-flow signal (usually a triangle or superstar that spins). If either of the are moving, there's water moving with the meter along with the leak is at your service series.

How to learn a digital normal water meter: You intend to observe the circulation rate. (All electronic meters will vary, so consult with your city on how best to examine yours.) When the flow rate can be zero, there is no water flowing from the meter plus the leak isn't in the assistance line.

How to verify if the drip is your irrigation system

If you've been through the above ways and the drip is not in the service line, another probably culprit is at your irrigation technique. Here's how exactly to find out if the irrigation program is the issue.
1. Turn your home shut-off valve again on

You want normal water to flow into the irrigation system. To achieve that, turn the home shut-off valve back again on.
2. Make certain all water-using gadgets and faucets in your house are off

Every sink and appliance ought to be turned off because of this test. You intend to ensure that nothing in your house could be making use of water.
3. Check the drinking water meter

Use the very same instructions as over to check this particular meter. Your drinking water meter should nowadays be recording normal water use again.

To look at if the drip will be in the irrigation method, turn the from the water to the irrigation system. Generally in most homes this is the valve after your backflow preventer.

Now, when the water meter ceases recording water employ, this means you've isolated your normal water leak towards the irrigation system.
Most common areas for irrigation method leaks

Leaks inside the irrigation ranges that lead to large wet places in your yard usually occur in another of 2 locations:

In the tube between your backflow preventer and an irrigation valve box
A malfunctioning valve in a irrigation valve box

 
 

 

 

So there is a really wet area or large pool area of water inside your front yard, and you also suspect a normal water drip. But where could it be?

The two 2 most typical places happen to be:
In the primary service line in the middle of your drinking water meter and house shutoff valve
Within your irrigation system
We will show you how exactly to isolate these 2 elements of your plumbing method and apply your normal water meter to learn where the drip is.
Don't be anxious, it's quick: when you can switch a valve on / off, you are able to do this. (Needless to say, unless you want to, it is possible to contact our drip detection specialists.)
Notice: Shut-off valves can crack when you transform them on or off if they are previous or corroded.
How to check out if the drip will be in the provider line
Water makes your home from city's water key, through your normal water meter and trips underground through the primary service line on your home's shutoff valve.
To discover if that's where the leak is usually, we will turn off this to almost every other part of your house. To get this done...
1. Turn off the at the home's shut-off valve
Look for where your service range happens of the bottom and switches into your home. That is frequently in leading or corner of your house. However, in a few houses in Atlanta, the shutoff is really in the cellar.
To turn off of the water, in close proximity the shut-off valve. This tends to be considered a gate valve just like the 1 in the picture below.
2. Locate your drinking water meter
Choose a metal lid over a concrete box close to the curb. Work with a screwdriver to lift up the lid.
3. Browse the meter for the leak
You're examining to observe if water continues to be running right through the meter. If it's, the leak is your service series. If no normal water is going throughout the meter, the drip is someplace else.
How you browse the meter depends upon the sort of meter you could have: analog or electronic.
How to learn an analog drinking water meter: Go through the main dial hands plus the low-flow signal (usually a triangle or superstar that spins). If either of the are moving, there's water moving with the meter along with the leak is at your service series.
How to learn a digital normal water meter: You intend to observe the circulation rate. (All electronic meters will vary, so consult with your city on how best to examine yours.) When the flow rate can be zero, there is no water flowing from the meter plus the leak isn't in the assistance line.
How to verify if the drip is your irrigation system
If you've been through the above ways and the drip is not in the service line, another probably culprit is at your irrigation technique. Here's how exactly to find out if the irrigation program is the issue.
1. Turn your home shut-off valve again on
You want normal water to flow into the irrigation system. To achieve that, turn the home shut-off valve back again on.
2. Make certain all water-using gadgets and faucets in your house are off
Every sink and appliance ought to be turned off because of this test. You intend to ensure that nothing in your house could be making use of water.
3. Check the drinking water meter
Use the very same instructions as over to check this particular meter. Your drinking water meter should nowadays be recording normal water use again.
To look at if the drip will be in the irrigation method, turn the from the water to the irrigation system. Generally in most homes this is the valve after your backflow preventer.
Now, when the water meter ceases recording water employ, this means you've isolated your normal water leak towards the irrigation system.
Most common areas for irrigation method leaks
Leaks inside the irrigation ranges that lead to large wet places in your yard usually occur in another of 2 locations:
All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly